How to Choose the Right Wheel Offset for Your Car
Share
Choosing the right wheel offset can be confusing. Should you go with ET35, ET40, or something lower?
The answer depends on your vehicle, wheel width, and the look you want.
Here's a simple guide to choosing the right ET.

Step 1: Check Your Factory Wheel Specifications
Start with your original wheel size.
For example: 19×8.5J ET40
This means:
-
Diameter: 19 inches
-
Width: 8.5 inches
-
Offset: +40mm
Also confirm your bolt pattern (PCD), center bore (CB), and tire size.
Your factory specifications provide a useful starting point for choosing aftermarket wheels.
Step 2: Decide Your Preferred Fitment
OEM-Style: Keep wheel positioning close to factory specifications for a familiar appearance.
Flush Fitment: Move the wheels slightly outward for a fuller, cleaner stance.
Aggressive Fitment: Position the wheels farther outward for a wider appearance, provided there is sufficient clearance.
For most daily drivers, maintaining suitable clearance and predictable handling should come before appearance.
Step 3: Compare Different ET Values
Suppose your original wheels are 19×8.5J ET40.
If the width stays the same:
| New Offset | Wheel Position |
|---|---|
| ET40 | Original position |
| ET35 | 5mm outward |
| ET30 | 10mm outward |
| ET25 | 15mm outward |
| ET20 | 20mm outward |
These are position comparisons, not vehicle-specific fitment recommendations.
Step 4: Don't Forget Wheel Width
Offset and wheel width work together.
For example:
Original: 20×8.5J ET40
New: 20×10J ET30
The new wheels are 1.5 inches wider, and their offset is 10mm lower.
This means:
-
Outer edge moves approximately 29.1mm outward.
-
Inner edge moves approximately 9.1mm closer to the suspension.
Even a small change in ET can create a much larger difference when the wheel width also increases.

Step 5: Check Clearance Before Ordering
Before selecting the final offset, confirm:
-
Fender and wheel-arch clearance.
-
Suspension and strut clearance.
-
Brake caliper clearance.
-
Tire size and suspension travel.
-
Wheel load rating and vehicle requirements.
Brake clearance depends on wheel design as well as offset.
A wheel that fits while parked may still rub during steering or suspension compression.
Step 6: Can You Customize Wheel Offset?
Yes. Custom forged wheels can be manufactured with different offsets, subject to engineering and design limits.
For example, a custom wheel may be produced in ET35 instead of ET45 when the vehicle has sufficient clearance and the design allows it.
Wheel spacers can also move existing wheels outward.
A 10mm spacer with an ET40 wheel creates an effective installed offset of ET30, although the wheel's manufactured offset stays ET40.
Spacer compatibility, hub centering, and fasteners must be professionally checked.
For new custom wheels, choosing the correct ET during manufacturing is often preferable.
Step 7: What Information Do We Need?
To help select suitable wheel specifications, we recommend providing:
-
Car make, model, and year.
-
Original wheel and tire size.
-
Preferred wheel diameter and width.
-
Brake or suspension modifications.
-
Desired fitment or reference photos.
We can then review potential custom wheel configurations before production.
Frequently Asked Questions
How do I know which ET fits my car?
Start with factory specifications and compare wheel width, offset, tires, and available clearance.
Can I change ET40 to ET35?
An ET35 wheel sits 5mm farther outward than an ET40 wheel of the same width. Actual compatibility must still be checked.
Can front and rear wheels have different offsets?
Yes. Some vehicles use different front and rear specifications, but both axles must be evaluated separately.
Can custom forged wheels have any ET?
Many offsets are possible, but the final specification depends on wheel structure, strength, brake clearance, and manufacturing limits.
Final Thoughts
The right ET isn't always the lowest number. It's the one that gives your vehicle the desired appearance while maintaining proper fitment.
At M FORGED WHEELS, we produce custom 6061-T6 forged aluminum wheels with personalized sizes, widths, offsets, bolt patterns, and finishes.
Share your vehicle details with us, and we'll help review the appropriate specifications before production.
How Wheel Offset Affects Fitment, Handling & Driving Performance
What Is Wheel Offset (ET)? Positive, Negative & Zero Offset Explained
Website: https://www.mforgedwheels.com/
WhatsApp: https://wa.me/8618270405359